by teylor@alterendeavors.com | Sep 21, 2020
The #2B is a lustrous (but not mirrored) finish. #2B is also known as “mill finish” because it describes the unpolished state of the cold rolled material straight from the producing mill. While products with a #2B finish typically exhibit some luster, they are not...
by teylor@alterendeavors.com | Sep 21, 2020
The #3 finish has a wide range of uses across many industries. This finish is achieved by polishing on a wide belt machine, resulting in a coarser appearance. This finish measures between a 60-80 Grit and 50 RA.
by teylor@alterendeavors.com | Sep 21, 2020
#4 is the industry standard for satin finishes. This finish is similar to #3; however, the final polishing is done using a higher grit of 120-180 and 32 RA Max, producing a smoother, more refined finish. This finish is widely used across many industries, often for...
by teylor@alterendeavors.com | Sep 21, 2020
Variants of the #4 finish include the same initial procedure used to produce a standard #4 finish. In the case of a long grain finish, the grain runs continuously along the length of the product. This is also commonly referred to as a “hairline” finish.
by teylor@alterendeavors.com | Oct 19, 2020
Variants of the #4 finish include the same initial procedure used to produce a standard #4 finish, with a change in the direction of the grain. The difference between cross-grain and other satins finishes is the horizontal direction.
by teylor@alterendeavors.com | Sep 21, 2020
Variants of the #4 finish include the same initial grit as a standard #4, in a random orbital finish.
by teylor@alterendeavors.com | Sep 21, 2020
Similar to #4 except an even finer and smoother appearance. After initial polishing, the final finish is achieved by polishing with a 240-320 grit abrasive belt and measures a 20 RA max. This particular finish is most often applied to 304 Stainless Steel for use...
by teylor@alterendeavors.com | Aug 31, 2021
Variants of the #6 finish include the same initial procedure used to produce a standard #6 finish, with the grain that running continuously along the length of the product. This is also commonly referred to as a “hairline” finish.
by teylor@alterendeavors.com | Aug 31, 2021
Variants of the #6 finish include the same initial procedure used to produce a standard #6 finish. The difference between cross-grain and other satins finishes is the grain direction. A cross-grain satin finish will have the grain run in the horizontal...
by teylor@alterendeavors.com | Aug 31, 2021
Variants of the #6 finish include the same initial grit as a standard #6, in a random orbital finish.